|
| The 8600 Badger Breaker® is a rubber-tired, self-propelled, guillotine-type concrete pavement breaker which carries an eight-foot wide, 12,000 pound hammer. The drop height of the hammer is electrically adjustable from 0 to 9 feet. |
| Hammer weight |
12,000 pounds |
| Hammer width |
96 inches |
| Striking bar width |
Replaceable, 1.5 inch wide, weld-on striking bar mounted on bottom of hammer can be any length up to width of hammer (96 inches) |
| Engine |
Deutz BF6L913 (160 hp) |
| Drive system |
Hydrostatic drive |
| Operator controls |
Electric plug-in box controlling steering, forward/reverse direction, travel speed, drop height, cycle rate, and emergency stop |
| Lift system |
Rexroth pump, Badger hydraulic cylinder |
| Drop height |
0 to 108 inches, electrically adjustable |
| Lift cycle |
Up to 35 cycles/minute, electrically adjustable |
| Brake system |
Dynamic with parking brake |
| Machine width |
100 inches |
| Machine length |
216 inches, folded for travel 244 inches |
| Machine height |
Mast upright 147 inches, folded for travel 108 inches |
| Machine weight |
37,500 pounds |
| Working speed |
0/88 feet per minute |
| Travel speed |
Up to 5 miles per hour |
| |
| Manufactured by: |
 |
|
|
2520 N Clermont St, P.O. Box 337 |
|
|
Antigo, Wisconsin 54409 |
|
|
Phone 715-627-2222 Fax 715-623-7073 |
|
Badger State Highway Equipment, Inc. reserves the right to make changes in specifications shown herein or add improvements at any time without notice or obligation. |
|
