8600 Badger Breaker®

Download Spec Sheet

The 8600 Badger Breaker® is a rubber-tired, self-propelled, guillotine-style concrete pavement breaker which carries an eight-foot wide, 12,000 pound hammer. The drop height of the hammer is electrically adjustable from 0 to 9 feet.

Hammer weight 12,000 pounds
Hammer width 8 feet
Strike bar width Replaceable, 1.5 inch wide, weld-on strike bar mounted on bottom of hammer can be any length up to width of hammer (8 feet)
Engine Diesel, Minimum 140 hp
Drive system Hydrostatic drive
Lift height 0 to 9 feet, electrically adjustable
Lift cycle Up to 35 cycles/minute, electrically adjustable
Machine width 8.5 feet
Machine length 18 feet, folded for transport 20.3 feet
Machine height Mast upright 12.2 feet, folded for transport 9 feet
Machine weight 41,000 pounds
Working speed 0/88 feet per minute
Manufactured by:

Badger State Highway Equipment, Inc. reserves the right to make changes in specifications shown herein or add improvements at any time without notice or obligation.